Deal of the Day
HVAC
Free Pure Air Filtration System with the Purchase of a Qualifying Lennox System, Installation Included
Plumbing
$200 Off the Installation of a New 50-Gallon Water Heater or $350 Off the Installation of a New Tankless Water Heater.
Electrical
Free Mobile Friendly Light-Switch with Panel Change, WIFI Required

Circuit Breaker or Fuse Box?

It used to be that all houses, buildings, and electrical equipment were protected by a fuse box.
Many systems still are (your car, for example, uses a fuse box for its own electrical system).

undefined

As an electrical protection device, fuses are efficient and simple tools but as technology has
advanced, so has our security against danger and damage. Breaker boxes have almost universally
replaced fuse boxes in homes across America. But some still exist in homes. Do you need to upgrade to a breaker box. We can help if you feel you should, but we can also help you figure out if it is an upgrade your home actually needs.

Differences

A fuse works by being the weakest link on an electrical circuit. Every device and connection
should be rated for the current that can pass through the fuse. A 20-Amp fuse will open the circuit as soon as the rating is exceeded. If any device on that circuit cannot handle a 20-Amp current, the fuse should be lower to meet the limitations of the circuit. Mechanically, a strip of metal inside the fuse carries the current. When current reaches the fuse’s rating, that metallic strip vaporizes, permanently removing that fuse from service and opening the circuit to prevent damage. This happens extremely fast, and these fuses are very sensitive to overload conditions. As a fail-safe system, they are highly effective.

Breakers, on the other hand, use a more complicated system. Metal expands as it heats, so a
breaker is actually composed of two different strips of metals sandwiched together (the bi-metallic strip that’s mentioned so often). As current increases, the metal conductor inside a breaker circuit heats up, causing these metals to expand. Since the two metals expand at different rates, the strip bends. Once the strip bends far enough (the metal has grown hot enough due to the load being placed on it) the breaker trips and the circuit is shut off. A circuit breaker is effective and re-usable,
but not quite as fast-acting as a fuse.

Circuit Breakers

  • Re-usable
  • Can double as GFCI or AFCI breakers
  • Easily adaptable for new circuits
  • When installed professionally, unlikely to have
    the wrong amperage rating
  • Slower response times
  • Sensitive to vibrations

Fuses

  • Greater sensitivity and faster acting
  • Inexpensive
  • Must be replaced every time
  • Chance of replacing with incorrect fuse
  • Likely to be an older system

Properly installed, fuses are just as viable for protecting your home as a circuit breaker. Your main concern should be having spare fuses on hand in the event of an emergency and having the fuse box clearly marked for the right kind of fuse. A
circuit breaker is easier to use, but unless you’re experiencing regular blown
fuses, a full upgrade may not be necessary.

If you’re having issues with repeat breaker trips or blown
fuses, call Mainstream Electric for help.
We have the experience and tools to find the problem and get your
circuits back to stable operation.
Regular circuit overloads are often a sign of bigger problems and should
be dealt with before they become an issue.